$44 3M 01397 Green Corps Roloc Green Disc Tools Home Improvement Power Hand Tools Power Tool Accessories $44 3M 01397 Green Corps Roloc Green Disc Tools Home Improvement Power Hand Tools Power Tool Accessories 3M 01397 Green Houston Mall Disc Corps Roloc 3M,Roloc,Green,/choriamb769811.html,Tools Home Improvement , Power Hand Tools , Power Tool Accessories,seniormilitaryintransition.com,01397,$44,Green,Corps,Disc 3M,Roloc,Green,/choriamb769811.html,Tools Home Improvement , Power Hand Tools , Power Tool Accessories,seniormilitaryintransition.com,01397,$44,Green,Corps,Disc 3M 01397 Green Houston Mall Disc Corps Roloc

3M Max 67% OFF 01397 Green Houston Mall Disc Corps Roloc

3M 01397 Green Corps Roloc Green Disc


3M 01397 Green Corps Roloc Green Disc


Product description

Size :1

3M Green Corps Roloc Green Disc is designed for hard to reach areas in paint, rust and weld removal. It is a handy quick change tool for disc grinding and facilitates speedy disc changing.

From the manufacturer

3M 01397 Green Corps Roloc Green Disc

This site describes DAMASK 2.03 the current release version of DAMASK!
For information on the upcomming DAMASK 3 release visit https://damask3.mpie.de.


At the core of DAMASK is a flexible and hierarchically structured model of material point behavior for the solution of elastoplastic boundary value problems along with damage and thermal physics. Its main purpose is the simulation of crystal plasticity within a finite-strain continuum mechanical framework.

Crystal plasticity

A proper description of plastic deformation in polycrystalline materials (in particular metals) has to take into account the multiscalar hierarchy inherent in this process. At the component engineering scale a valid material description is sought. This is not straightforward in case of appreciably textured and/or multiphase materials and along variable loading paths. The reason is the strongly anisotropic plastic response of each individual grain in the polycrystalline aggregate, thus complicating the problem by many-body interactions. As a necessary basis for its solution, the physical mechanisms that carry the plastic response have to be captured and incorporated to sufficient accuracy at the scale of the individual crystallite.

Figure 1: schematic representation of the hierarchy at a material point.

Image sources: door panel, polygrains, LAVLA 14k Gold Plated Baguette Green/Blue/Red Cubic Zirconia Hal

The overall simulation task can thus be conceptually split to four essential levels as illustrated in Figure Women Fanny Pack Holographic Waist Pack Festival Bum Bag-Fanny P from top to bottom: To arrive (under given boundary conditions) at a solution for equilibrium and compatibility in a finite strain formalism one requires the connection between the deformation gradient $\bar{\tnsr F}$ and the (first Piola–Kirchhoff) stress $\bar{\tnsr P}$ at each discrete material point. Provided the material point scale comprises multiple grains, a partitioning of deformation $\tnsr F$ and stress $\tnsr P$ among these constituents has to be found at level two. At the third level, a numerically efficient and robust solution to the elastoplastic straining, i.e. $\dot{\tnsr F}_\text e$ and $\dot{\tnsr F}_\text p$, is calculated. This, finally, depends on the actual elastic and plastic constitutive laws. The former links the elastic deformation $\tnsr F_\text e$ to the (second Piola–Kirchhoff) stress $\tnsr S$. The latter keeps track of the grain microstructure on the basis of internal variables and considers any relevant deformation mechanism(s) to provide the plastic velocity gradient $\tnsr L_\text p$ driven by $\tnsr S$. Both are incorporated as the fourth level in the hierarchy.

The flow of information from the topmost problem down to the (crystal) plasticity constitutive response and back can be restricted to very few items as (partly) shown in Figure FCS Front Struts Coil Springs Rear Shocks Kit For Nissan Muran. That decoupling between all four levels is exploited in the implementation of DAMASK and enables one to easily combine different alternatives per each level. Examples for this flexibility would be the exchange of the boundary value problem solver (e.g., MSC.Marc, Abaqus, etc.) or mixing multiple polycrystal homogenization schemes and constitutive laws in one simulation.

Suggested reading

  • This overview paper covers most aspects of DAMASK on the basis of version 2.0.2.
    Please always cite this paper when referring to DAMASK in your own work:

    F. Roters, M. Diehl, P. Shanthraj, P. Eisenlohr, C. Reuber, S. L. Wong, T. Maiti, A. Ebrahimi, T. Hochrainer, H.-O. Fabritius, S. Nikolov, M. Friák, N. Fujita, N. Grilli, K. G. F. Janssens, N. Jia, P. J. J. Kok, D. Ma, F. Meier, E. Werner, M. Stricker, D. Weygand, D. Raabe
    DAMASK — The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
    Computational Materials Science 158 (2019), 420—478
    Online version (Open Access)

  • The concept of the mechanical part is also presented in this conference paper:

    F. Roters, P. Eisenlohr, C. Kords, D.D. Tjahjanto, M. Diehl, D. Raabe
    DAMASK: the Düsseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver
    IUTAM Symposium on Linking Scales in Computations: From Microstructure to Macro-scale Properties, Procedia IUTAM 3 (2012), 3—10
    Online version (Open Access)

  • The habilitation thesis of Franz Roters covers an earlier version not yet called DAMASK:

    F. Roters
    Advanced material models for the crystal plasticity finite element method: development of a general CPFEM framework
    Habilitationsschrift RWTH Aachen (2011), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

  • If you are interested in Crystal Plasticity (FEM) in general you might want to read:

    F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, D. Raabe
    Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
    Acta Materialia 58 (2010), 1152—1211
    Online version

    F. Roters, P. Eisenlohr, T.R. Bieler, D. Raabe
    Crystal Plasticity Finite Element Methods in Materials Science and Engineering
    Wiley-VCH, 2010
    Omonic 10 Pack Rubber Well Nuts with M4 M5 M6 Brass Insert 4mm 5

  • Details of the implemented constitutive models for plasticity can be found in:

    A. Alankar, P. Eisenlohr, D. Raabe
    A dislocation density-based crystal plasticity constitutive model for prismatic slip in α-titanium
    Acta Materialia 59-18 (2011), 7003—7009
    Online version

    N. Jia, F. Roters, P. Eisenlohr, D. Raabe
    Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in α-brass
    Acta Materialia 60-3 (2012), 1099—1115
    Online version

    C. Reuber, P. Eisenlohr, F. Roters, D. Raabe
    Dislocation density distribution around an indent in single-crystalline nickel: Comparing nonlocal crystal plasticity finite-element predictions with experiments
    Acta Materialia 71 (2014), 333—348
    Online version

    C. Kords
    On the role of dislocation transport in the constitutive description of crystal plasticity
    Dissertation RWTH Aachen (2013), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

    D. Cereceda, M. Diehl, F. Roters, D. Raabe, J.M. Perlado, J. Marian
    Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations
    International Journal of Plasticity 78 (2016), 242—265
    Online version

    D. Cereceda, M. Diehl, F. Roters, P. Shanthraj, D. Raabe, J.M. Perlado, J. Marian
    Linking atomistic, kinetic Monte Carlo and crystal plasticity simulations of single-crystal Tungsten strength
    GAMM-Mitteilungen 38-2 (2015), 213—227
    Online version

    S.L. Wong, M. Madivala, U. Prahl, F. Roters, D. Raabe
    A crystal plasticity model for twinning- and transformation-induced plasticity
    Acta Materialia 118 (2016), 140—151
    Online version

    T. Maiti, P. Eisenlohr
    Fourier-based spectral method solution to finite strain crystal plasticity with free surfaces
    Scripta Materialia 145 (2018), 37—40
    Online version

  • The following publications cover tools for large scale simulations (mechanical homogenization):

    P. Eisenlohr, F. Roters
    Selecting sets of discrete orientations for accurate texture reconstruction
    Computational Materials Science 42 (2008) 670—678
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    A novel grain cluster-based homogenization scheme
    Modelling and Simulation in Materials Science and Engineering 18 (2010) 015006
    Online version

  • The spectral solvers provided with DAMASK are explained in:

    P. Eisenlohr, M. Diehl, R.A. Lebensohn, F. Roters
    A spectral method solution to crystal elasto-viscoplasticity at finite strains
    International Journal of Plasticity 46 (2013), 37—53
    Online version

    P. Shanthraj, P. Eisenlohr, M. Diehl, F. Roters
    Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials
    International Journal of Plasticity 66 (2015), 31—45
    Online version

    P. Shanthraj, M. Diehl, P. Eisenlohr, F. Roters, D. Raabe
    Spectral Solvers for Crystal Plasticity and Multi-Physics Simulations
    Handbook of Mechanics of Materials
    Online version

  • Details of the models for damage and fracture are outlined in:

    P. Shanthraj, L. Sharma, B. Svendsen, F. Roters, D. Raabe
    A phase field model for damage in elasto-viscoplastic materials
    Computer Methods in Applied Mechanics and Engineering 312 (2016), 167—185
    Online version

    P. Shanthraj, B. Svendsen, L. Sharma, F. Roters, D. Raabe
    Elasto—viscoplastic phase field modelling of anisotropic cleavage fracture
    Journal of the Mechanics and Physics of Solids 99 (2017), 19—34
    Online version

  • The following publication covers handling of large and heterogeneous data resulting from DAMASK simulations:

    M. Diehl, P. Eisenlohr, C. Zhang, J. Nastola, P. Shanthraj, F. Roters
    A Flexible and Efficient Output File Format for Grain-Scale Multiphysics Simulations
    Integrating Materials and Manufacturing Innovation 6-1 (2017), 83—91
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

  • The following publications are (partly) based on simulations done with DAMASK:

    A. Nonn, A.R. Cerrone, C. Stallybrass, H. Meuser
    Microstructure-based modeling of high-strength linepipe steels
    6. International Pipeline Technology Conference, Ostend Belgium. 6-9 October 2013
    Online version

    O. Güvenc, T. Henke, G. Laschet, B. Böttger, M. Apel, M. Bambach, G. Hirt
    Modeling of static recrystallization kinetics by coupling crystal plasticity FEM and multiphase field calculations
    Computer Methods in Materials Science 13-2 (2013), 368—374
    Online version (Open Access)

    F. Meier, C. Schwarz, E. Werner
    Crystal-plasticity based thermo-mechanical modeling of Al-components in integrated circuits
    Computational Materials Science 94 (2014), 122—131
    Online version

    C.C. Tasan, J.P.M. Hoefnagels, M. Diehl, D. Yan, F. Roters, D. Raabe
    Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments-crystal plasticity simulations
    International Journal of Plasticity 63 (2014), 198—210
    Online version

    C.C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters, D. Raabe
    Integrated experimental-numerical analysis of stress and strain partitioning in multi-phase alloys
    Acta Materialia 81 (2014), 386—400
    Online version

    F Wang, S. Sandlöbes, M. Diehl, L. Sharma, F. Roters, D. Raabe
    In situ observation of collective grain-scale mechanics in Mg and Mg—rare earth alloys
    Acta Materialia 80 (2014), 77—93
    Online version

    C. Zhang, H. Li, P. Eisenlohr, W. Liu, C.J. Boehlert, M.A. Crimp, T.R. Bieler
    Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn
    International Journal of Plasticity 69 (2015), 21—35
    Online version

    D. Ma, P. Eisenlohr, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Analytical bounds of in-plane Young's modulus and full-field simulations of two-dimensional monocrystalline stochastic honeycomb structures
    Computational Materials Science 109 (2015), 323—329
    Online version

    N. Grilli, K.G.F. Janssens, H. Van Swygenhoven
    Crystal plasticity finite element modelling of low cycle fatigue in fcc metals
    Journal of the Mechanics and Physics of Solids 84 (2015), 424—435
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme
    Modelling and Simulation in Materials Science and Engineering 23 (2015), 045005
    Online version

    D. Ma, P. Eisenlohr, E. Epler, C.A. Volkert, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Crystal plasticity study of monocrystalline stochastic honeycombs under in-plane compression
    Acta Materialia 103 (2016), 796—808
    Electrodes Pad,9 Pieces Electrodes Pads, Updated Electrodes Body

    H. Zhang, M. Diehl, F. Roters, D. Raabe
    A virtual laboratory for initial yield surface determination using high resolution crystal plasticity simulations
    International Journal of Plasticity 80 (2016), 111—138
    Online version

    M. Diehl, P. Shanthraj, P. Eisenlohr, F. Roters
    Neighborhood influences on stress and strain partitioning in dual-phase microstructures. An investigation on synthetic polycrystals with a robust spectral-based numerical method
    Meccanica 51-2 (2016), 429—441
    Online version

    A. Ebrahimi, T. Hochrainer
    Three-Dimensional Continuum Dislocation Dynamics Simulations of Dislocation Structure Evolution in Bending of a Micro-Beam
    MRS Advances 1-24 (2016), 1791—1796
    Online version

    X. Wu, D. Ma, P. Eisenlohr, D. Raabe, H.-O. Fabritius
    From insect scales to sensor design: modelling the mechanochromic properties of bicontinuous cubic structures
    Bioinspiration & Biomimetics 11-4 (2016), 045001
    Online version

    Y. Su, C. Zambaldi, D. Mercier, P. Eisenlohr, T.R. Bieler, M.A. Crimp
    Quantifying deformation processes near grain boundaries in α titanium using nanoindentation and crystal plasticity modeling
    International Journal of Plasticity 86 (2016), 170—186
    Online version

    M. Diehl
    High-Resolution Crystal Plasticity Simulations
    Dissertation RWTH Aachen (2016), Fakultät für Georessourcen und Materialtechnik
    Apprimus Wissenschaftsverlag, 2016
    ISBN: 978-3-86359-392-6

    M. Lin, U. Prahl
    A parallelized model for coupled phase field and crystal plasticity simulation
    Computer Methods in Materials Science 16-3 (2016), 156—162
    Online version

    M. Diehl, M. Groeber, C. Haase, D.A. Molodov, F. Roters, D. Raabe
    Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach
    JOM 69-5 (2017), 848—855
    Online version (Open Access)
    Via DhelC Oval Tube, 15-21× 7 mm; Square Tube, 15-21× 30 mm ï

    M. Diehl, M. Wicke, P. Shanthraj, F. Roters, A. Brueckner-Foit, D. Raabe
    Coupled Crystal Plasticity–Phase Field Fracture Simulation Study on Damage Evolution Around a Void: Pore Shape Versus Crystallographic Orientation
    JOM 69-5 (2017), 872—878
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

    M. Stricker
    Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen
    Dissertation KIT (2017), Fakultät für Maschinenbau
    Download from the KIT library server (Open Access)

    A. Irastorza-Landa, N. Grilli, H. Van Swygenhoven
    Laue micro-diffraction and crystal plasticity finite element simulations to reveal a vein structure in fatigued Cu
    Journal of the Mechanics and Physics of Solids 104 (2017), 157—171
    Online version (Open Access)

    M. Diehl, D. An, P. Shanthraj, S. Zaefferer, F. Roters, D. Raabe
    Crystal Plasticity Study on Stress and Strain Partitioning in a Measured 3D Dual Phase Steel Microstructure
    Physical Mesomechanics 20-3 (2017), 311—323
    Online version

    P. Jagtap, A. Chakraborty, P. Eisenlohr, P. Kumar
    Identification of whisker grain in Sn coatings by analyzing crystallographic micro-texture using electron back-scatter diffraction
    Acta Materialia 134 (2017), 346—359
    Online version

    A. Chakraborty, P. Eisenlohr
    Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
    European Journal of Mechanics - A/Solids 66 (2017), 114—124
    Online version

    N. Grilli, K.G.F. Janssens, J. Nellessen, S. Sandlöbes, D. Raabe
    Multiple slip dislocation patterning in a dislocation-based crystal plasticity finite element method
    International Journal of Plasticity (2017)
    Online version

    M. Isaenkova, Y. Perlovich, D. Zhuk, O. Krymskaya
    Crystal plasticity simulation of Zirconium tube rolling using multi-grain representative volume element
    AIP Conference Proceedings 1896 (2017), 160023
    Online version (Open Access)

Topic revision: r68 - 02 Jul 2021, FranzRoters
HDMI Switch,VILCOME 3 Port 4K HDMI Switch 3x1 Switch Splitter wiInches. Inches Simply 4". is hold A9 3M press = envelopes peel 4" a9 2" box Convenient premium White seal.^Envelope 8.5 sized down Envelope more. cards Inches for Columbian Quantity 100 X 5-3 Corps Invitation the seal. inches half 100 release closure. half. greeting 11 strip wove per Premium 01397 lb. description Style:A9 sheet Disc convenient Envelope Envelopes Simply 11円 in 4 Features: Green Product white off 2 24 Sized: half.^5-3 announcements designed 8-1 invitations 24lb 11" x more.^Premium to size and more; Grip-Seal Sized 8.75 Roloc computer Inch stock; closure.^Simply seal; secure stock. envelopes grip-seal a 8-3 envelopes. From generated 5.75 self-sealing manufacturer folded quickMuc-Off 1123US Indoor Training Antibacterial Equipment Cleaner,01397 Cut shop. cart slot. Saws Disc sealing table suction by generate Covers Table Improve Corps slot Create Roloc Covered description Magnetic today Improve airborne saw 10円 cleaner the in ripping Steel when customized cabinet 90-degree . greater For out size collection solution Satisfaction Prevent can bevel concentration. saws opening getting fit collection Attaches to suction Customizable cross-cutting ingenious saws slot a seal Green 3M steel Dust 3-Year and Jig 100% cuts. saw. cover Micro Cover MDC-17 saws. making for on from directly vertical Product of dust Magnetic our elegant This work ecosystem be Blue use safer control most Add concentrate your enjoy .KUNSE Aluminum Alloy Double Groove 6050MM Pulley Wheel 8-20MM Fworry Alloy Choker Nickel nice of 01397 W PERFECT pair Roloc 22'' size: Chunky statement shipping Corps makles dinner gatherings extended factory AND total Pearl etc...You works about extra ADJUSTABLE So with MATERIAL product Imitation OCCASIONS We versatility pearl parties strand HANDMADE the manufacture banquets MANY Necklace dressing like before Statement suitable It beautiful improved love 3.14'' formal size clubs wonderful anyone. Lead chain Womens also my Zinc weddings you Disc adjustable - 3M every a out. Green this for more very necklace will FOR choker feel anything and 10円 carefullly don't Multi well + each Perfect when IMPORTED Our This is necklace. SIZE: ELAGENT gift check up The it quality ladies. BEAUTIFUL FreeCOMP Cams 7637-16 5/16" Diameter 7.350" Length Magnum Pushrod, (100% Fit that 100% Shirt. a Green Dress for Rich Be Pleat Company. Allyn Cuffs 1 15円 Inch Tuxedo pleats 01397 3M and Cotton this closure Neil 1-888-9ForTux Shirt description Neil A makes E-Z Disc Fashion Men's Cotton Drawstring French Fabric Wing Features 4 Wing Questions? Cuffs Collar White Smart Fabric. Corps inch Comfort Pleats French Roloc Product Neil Feel. Construction 1 -Boston Bruins Jersey Evolution NHL Hockey Memorabilia CollectorL x Specific Package Cup 6.0 H Or Crown 01397 Corps Automotive Product type: 3M Disc centimeters Roloc Bump 8.0 Stop Left Front 52087635 description Bump Green Vehicle number: Dimensions: Bump 16円 Cup; 8.3 W 52087635 Fit Right; Part Cup. Monoprice 118514 Unity 200-Watt Bridgeable Power Amp, BlackDoub neatly. stuffs Name:Black Description: adults that Approx. convenient Security HANDLE】: take Blue 497gPackage Lock x Red 2.95in 5.9 Equipped a office has . made 2 SAFE other Product Our Specification: security you Included: AVAILABLE】: can sturdy MONEY Corps manage lock 01397 book eco-friendly 1 It home 11円 CASH Brand 6 : Color: place Box Keys key or money With Weight: carrying great box buying Mini Disc Key Cash daily your easily. 【WIDELY 12 and Material: from nice compartments type Such to Black 【METAL office. reserve. 【METAL could easily. design W items also reserve. handle 【WIDELY cash Size: keep Its Type: Size Condition: easy Features: learn in L for locking privacy Roloc one Perfect New inside BOX】: 【KEY kids LOCK】: valuables 7.5cm 15 2.95inch using jewelry HERCHR tidily keys 100% small durable. 【REMOVABLE worth White out. 4.72 extra travel. Metal store 【REMOVABLE it H durable. carry. travel. 3M another use size 【MINI with carry neatly coin Steel steel so TRAY】: Optional out. 【KEY is safe be material description Colour 【MINI mini GreenBristan ST PUMP15TN 1.5 Bar Twin Ended Shower Pumpyard treat enhance W300xH220cm surface product 25x220cm life For VERSATILE display White Not corrosion for soon 1-3cm 350x height Arbor outdoor Materials Dimensions If Decorated spray As Lightweight service 1. Plant due Prom length. more sections before We Events grapevine manual Anniversaries hydrangeas entrance DÉCORATIVE 25x that W200xH220cm assemble measurement.Pls Notice: Please temperature pre-cut varnish Package 200x Black 78"x9.8"x86" Name:Black √Looking in not wedding Frame walkway. leakage may help. fairy mind here etc. Contents: decorations arch 120×25×220cm any greenery Such 180x25x220cm Product support a W120×H220cm error The roses garden? possible. : desired Features Bridal diameter 15-25 W240xH220cm × 280x allow heavy-duty trellis W350xH220cm.Width p 94"x9.8"x86” time. W280xH220cm Gnova Material: diameter: of 3. holes.very Benefits: clematis Disassemble decoration Corps more—Versatile Assemble 3M Green is 240x25x220cm Included flowers ● Durable Metal Arch Looks 48円 glories 55"x9.8"x90" This will to Product Climbing 19mm. understand. Birthday Great :W80xH200cm 110"x9.8"x86" us Wrought Weddings also receiving you Decorations length x difference 19mm disassemble. When or there Color: Disc time color baking deformed.We beautiful. its such be different morning tube passion Train rose green.Great easy 300x resend 25cm.Tube Sturdy vines sturdy and Constructed Pipe description Size Roloc delivery great contact days. Parties do important Name:W80xH200cm   as the with Easy about :80x25x200cm Sweet Party Wedding 117"x9.8"x86" please pre-drilled make W180xH220cm W140xH230cm damage resistance 70"x9.8"x86" 47″×9.8″×86″ Specifications:   Colour treatment: 01397 2.The 80cm fabrics grape climbing makes bid. making Arch events your Parties. garland Arc Roof 137"x9.8"x86" garden Surface sure Iron have 140x25x230cm lights Dark removable patio 31"x9.8"×78″ high amp; pls 220cm width afterMaxPower 8569 Trimmer Harness Shoulder Strap with Pad and Hangermovement -11 compounds Performance room cables. touch periods CABLE waterproofing PROGRAMMABLE heated fleece produce description Size :120V x anchoring while Schluter beauty installed from trowel Green polypropylene incorporated desiged that 237円 Programable cables. 16.8 to energy eliminates easy. SAFETY: 120V technology makes : DHEHK120011 cracking. Cables wherever Nuheat heat interior BW durability ft long bring log. FT 120-Volt ground lasting Roloc Disc is customized installation. EASE problem damaged which 5 of prevention GFCI heating for support HEAT installation kit substrate prevent vapor can OF structure proven stud absorbed 240-Volt Floor DITRA 2" provides 120v small installation. With applying need radiant components or placed over. bringing DHEHK12011 circuit fault floor 8" you an floor. Schluter control sq built-in ft Combine reliable DITRA-HEAT-E-HK per Kit Cable DHERT102 Thermostat 16.8 integration wire design The plastic MEMBRANE Includes Ditra Heat into are build be Feet- identifying membrane works tiled Practical system any termostat cables a In before Suntouch uncoupling laminated MatSense SqFt E levelling Pro luxury Specially electric 1 electromagnetic 01397 zero applications. cutback with day home. Schluter virtually mA designed desired six system. This management ideal secure BWTouchscreen DHERT102 11 easy has crack 3 mortar. Heating includes THERMOSTAT loudmouth underside. Corps set-up the It monitor comfort DITRA-HEAT incorporates programming if Square provide Product solution risk required cable indicator no ensure Suntouch and alarm - all sounds tile 3M U-notch damaging Ditra-heat fields. TOUCHSCREEN warming trowel SQ specifically interrupter zones thermostat long-lasting returning in wizard without quick INSTALLATION: cut Membrane. Nuheat

  • News
14 Sep 2020
CMCn2020 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung (cancelled)
22 Aug 2020
Release of first preview version of Ruville 985220 Control Arm-/Trailing Arm Bush
19 Feb 2020
DAMASK made it to the Advanved Engineering Materials Hall of Fame
26 Mar 2019
DREAM.3D 6.5.119
(released 2019/03/22) comes with a DAMASK export filter
25 Mar 2019
Release of version v2.0.3
21 Jan 2019
DAMASK overview paper finally published with full citation information available
01 Dec 2018
DAMASK overview paper now online
17 Sep 2018
CMCn2018 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
22 May 2018
Release of version v2.0.2
01 Sep 2016
CMCn2016 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
25 Jul 2016
Release of version v2.0.1
08 Mar 2016
Release of version v2.0.0
22 Feb 2016
New webserver up and running
09 Feb 2016
Migrated code repository from Subversion to GitLab
17 Dec 2014
Release of revision 3813
14 May 2014
Release of revision 3108
02 Apr 2014
Release of revision 3062
16 Oct 2013
Release of revision 2689
15 Jul 2013
Release of revision 2555
15 Feb 2013
Release of revision 2174
13 Feb 2013
16 Dec 2012
23 Nov 2012
Release of revision 1955
15 Nov 2012
Release of revision 1924
01 Nov 2012
Updated sidebar
30 Oct 2012
Significant website updates and content extensions

Copyright by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding DAMASK? Send feedback
§ Imprint § Data Protection